Ok so I got it working on Sunday, but I’ve had a long week and didn’t have a chance to update. The C6100 is up and running. I’ve moved it into the DCF and surprisingly, the noise on it is actually so little, I can not hear it through the door. That was one of my biggest concerns. Long story short, the process was involved, but mostly because the SSL certs on the management IPs are so outdated.
So all that said, this is what I ended up with:
I’ve never had that much compute, memory, storage, or anything. That was a very, very large data center not long ago.
Cool. Now on to other cool stuff.
Oh… and a couple of things to note in case someone is actually reading this.
The back of the C6100 gets **hot**. I noticed in the move from my office into DCF that the USB thumb drives I’m using for boot were very hot. I’m concerned that it’s going to take them beyond supported limits, so I bought a set of little pig tails to have them off the motherboard.
Also – this thing runs relatively low power, but it is sucking about 660 watts being mostly idle. I’m going to have to buy another power supply and another UPS to make sure that I survive more than 5 minutes of outage.